Flood sensor

Product Size
  • W: 63 mm
  • H: 35 mm
  • D: 13 mm
Technical specification

Power supply mode

DC 5-24V

Max Load

0.5W

Current

0.15A

Panel material

ABS plastic

Product color

White

Built-in Sensors

Flood

Operating Temperature °C

-20°C - +80°C

Operating Temperature °F

-4°F ～ +176°F

Safety features

Short Circuit, Thermal Protection, Tamper Protection, Disconnection alarm, Anti-Flammable Housing, Static Protection, Surge Protection

IP rating

IP67

Insulation Resistance

≤0.3MΩ

Wiring
  • Connect PIN 1 of the leak sensor to a digital input on the controller (e.g., IN1).
  • Connect PIN 2 of the leak sensor to the GND terminal of the input side.
  • Connect the 12V power supply to the controller’s +12V and GND terminals.
Flood sensor via App
  1. Choose Controller
    1. Tap on the Controller that you would like to add new I/O to.
    2. To edit the I/O, click on the Controller to which the I/O is added.
  1. Add button for Inputs
    1. Inputs tab is selected.
    2. List of Inputs is shown.
    3. In order to add new Input tap on the Add button.
  1. Choose type - Inputs
    1. From the list that is shown tap on the desired I/O that you would like to add.
  1. New Leakage sensor
    1. Fill the following form:
      1. Name - Write the name of the Leakage sensor.
      2. Role - Choose Role from the list.
      3. Group - Choose Group from the list. Group is a group of I/O and scenarios that seems most logical to you.
      4. Pin - Choose Pin from the list. Pin is physical place on the Controller where I/O is connected to it.
      5. Photo - Choose photo for the Leakage sensor.
      6. Identifier - This field is the identifier of the I/O in the electrical project.
      7. Advanced - You can choose type of the signal that activates or tiggers the Leakage sensor: rising, falling, change, change inverted.
      8. Timeout - It is the duration for which the Leakage sensor will remain active in auto mode.
    2. When you want to confirm your choice tap button Save and Submit.
  1. Select Roles - Inputs
    1. Tap in the field Roles.
    2. Select checkbox/checkboxes (for multiple choice) next to the Role/Roles that you would like to choose.
    3. To confirm selection tap the button Save/Done.
  1. Select Groups - Inputs
    1. In this step you should select Group.
    2. Select check box/check boxes next to the desired Group/Groups from the list.
    3. When you want to confirm your choice tap button Done/Save.
  1. Change photo
    1. Tap on the photo of the Leakage sensor.
    2. You have three options:
      1. Open Library - The phone’s Library will open.
      2. Open Camera - You can take a picture using your smartphone.
      3. Choose default image - These images are prepared in advance in order  to provide a complete and seamless experience.
  1. Choose Pin
    1. Tap on the radio button next to the Pin that you would like to choose.
    2. To confirm selection tap on Save/Done.
  1. Advanced - New Leakage sensor
    1. Click radio button next to the type of signal that you would like to choose.
    2. You can choose:
      1. Rising
      2. Falling
      3. Change
      4. Change inverted
    3. You can choose type of the signal that activates or triggers the Leakage sensor.