1 Gang Dimmer Module (L+N)

Product Description
  1. Indicator Light
  2. Reset Key
  3. RF Receiver
  4. Mounting Clip
Product Size
  • Without Mounting Clip
    • W: 39 mm
    • H: 39 mm
    • D: 18 mm
  • With Mounting Clip
    • W: 39 mm
    • H: 39 mm
    • D: 23 mm
Technical specification

Power supply mode

220-240V 50/60Hz

Connectivity

Zigbee

Frequency

2.4GHz-2.484GHz

Wiring

N - Neutral, L - Line

Panel material

ABS+PC material

Product color

White

Number of channels

1 channel

Operation range

200m

LED Indicators

Yes

Operating Temperature °C

-10°C ～ +40°C

Operating Temperature °F

-14°F - +104°F

Safety features

Overload, Over Voltage, Short Circuit, Thermal Protection, Surge Protection, Static Protection

IP rating

IP20

Wiring Instructions and Diagrams
  • Turn off the power at the circuit breaker before you start. Safety first!
  • Connect the wires as shown in the wiring diagram. Make sure Live (L), Neutral (N), and other terminals are connected correctly.
  • Place the module into the junction box carefully. Avoid bending or damaging the wires.
  • Turn the power back on, then follow the setup instructions (using the app or a manual switch, if needed).
  • Without a Manual Switch
  • With a Manual Switch
Manual Override

The Dimmer switch terminal allows manual control for the end-user to turn the light on/off or adjust the brightness using a push-button.

  • Short press (<1 second): toggles the light on or off.
  • Long press (>1 second): adjusts the brightness level (dimming).

Notes:

  • Adjustments made via the app or push-button will overwrite each other. The last setting is saved in memory.
  • The app control stays synchronized with the manual switch.
  • The “S” terminal can be left unconnected if manual control is not needed.
System requirements

The PIERRE Wave system is a user-friendly solution for integrating and managing smart devices through a central platform. The system consists of the following components:

A - Required Elements:

  1. PIERRE Wave Products: These smart devices, including lighting, thermostats, sensors, and other appliances, connect wirelessly to the PIERRE Wave Gateway. They provide essential functions and capabilities for the system.
  2. PIERRE Wave Gateway: The central unit linking all PIERRE Wave devices, the gateway manages communication and data exchange, ensuring security and stability. It supports remote access and control, with the default Berlin display interface, though users can choose any PIERRE display model.

B - Optional Elements:

  1. Mobile PIERRE App: This app allows users to manage and monitor the system from their smartphone or tablet, offering real-time updates and remote access. It provides convenience but is not necessary for basic system operation.
  2. Router: An optional component that enables internet connectivity, allowing devices to be accessed and controlled remotely.
  1. System Operation: The gateway can connect to the router via Wi-Fi or LAN for internet connectivity, enhancing remote management capabilities. PIERRE Wave products communicate wirelessly with the gateway, which acts as the central hub. This bidirectional communication allows data to flow both ways, enabling users to send commands and receive status updates through the Mobile PIERRE App. The app facilitates effective management and real-time feedback on device statuses.
App-to-Device Pairing

Please scan the QR code to download PIERRE application
 

Log in with you Username and Password
 

Open Settings and press "Add Wave I/O"
 

Press and hold the Reset Key for 10 seconds (use a small, thin object like a paperclip) until the Indicator Light starts flashing

  1. Indicator Light
  2. Reset Key
  3. RF Receiver
  4. PIERRE Wave Gateway 
     

Press "Find Devices"
 

PIERRE application will show the list of available devices. Press "Add found devices"
 

Enter Name, Role and Group settings and Save it
 

When the Light indicator stops flashing, the PIERRE Wave pairing process is finished
 

FAQ

Q1: What should I do if I can’t configure the dimmer module? 

  • Please check whether the device is powered on.
  • Make sure the PIERRE Gateway is available.
  • Make sure the wiring is correct. 


Q2: What device can be connected to this PIERRE dimmer module? 

It can be connected to devices such as triac led light, incandescent lamp or halogen lamp.

Q3: What happens if the WIFI goes off? 

You can still control the device connected to the switch module with your traditional switch and with PIERRE Displays. 

Q4: How do I reset the device? 

1. Switch the button for 10 times, and wait for about 10s until the indicator light of the module flashes quickly.
2. Press the reset key for about 10s until the indicator light of the module flashes quickly.